2. Transformer Test System Transformer test system is an integrated test bench, combined with several test instruments and equipment for a variety of routine tests on transformers. It can provide reliable data for supervising and manufacturing distribution and power transformers.
    2. Transformer Loss Tester The transformer loss tester has a high precision integrated test instrument, not only for checking out transformer capacity, but also for testing transformer performance such as no-load current, no-load loss, short-circuit voltage, short-circuit loss, impedance voltage, etc.
    2. Instrument Transformer Test Sets The instrument transformer test sets is a full automatic microprocessor-based integrated test set. It can perform tests of current transformers and potential transformers, such as excitation, ratio, winding polarity, ratio and phase angle error, etc.
    2. Transformer Winding Resistance Meter This ZRS series transformer winding resistance meter is the newest instrument for measuring DC resistance of big power transformers windings. It's able to measure three windings simultaneously and it has auto-discharge circuit for operator safety, for OLTC transformer, discharge no needed. Test duration is only one third than conventional single-phase DC meter.
    2. Cable Hipot Test System The cable hipot test system includes frequency power, exciting transformer, reactors and voltage divider. Reactors are dry resin casting type, suitable for different cable tests. Variable-frequency resonance voltage raising device makes reactor and capacitor achieve resonance by adjusting frequency of power and getting high voltage and big current on tested objects.
    2. Partial Discharge Test System The partial discharge test system is special to measure partial discharge of transformers, motors, cables, GIS, switches, arresters and others. It has special dual-channel measuring function which allows to make several tests to different items or several tests to different points on same item, it's also suitable to analyze discharging positions of big size transformers.
    2. Transformer Turns Ratio Meter High turns ratio range: 1-10,000
      Built-in large-size thermal printer.
      Phase angle and winding polarity measuring.
      Name-plate turns ratio calculation.
    2. Tridimensional Core Transformer Making Machine Our tridimensional core is especially designed for producing tridimensional core transformer which exhibits better performance, more reasonable structure, as well as less production cost. The tridimensional core is a new structure wound GRGO core with three columns of round cross section.
    2. Transformer Oil Vacuum Filtering Machine This series transformer oil vacuum filtering machine is a kind of typical double-stage vacuum oil purifiers and can process and recycle transformer oils efficiently under vacuum conditions. It is capable of dehydrating, degassing, as well as purifying various insulation oil utilized for high voltage transformers, circuit breakers, etc.
    2. Transformer Radiator Fin Plate Forming and Welding Line Our transformer radiator fin plate forming and welding line take advantage of the technology from Germany GEORG and Canadian MTM. It is designed mainly to manufacture fin plate of different widths (520 or 535mm, 480mm, 320 or 310mm) with high efficiency.
    2. Capacitance and Dissipation Factor Meter This capacitance and dissipation factor meter is an up-to-date test instrument for measuring capacitance and dissipation factor (dielectric loss and impedance) for full automatically voltage devices such as transformers, cables, capacitors, insulators, HV switches, arresters, etc.
    2. Vacuum Drying Furnace This vacuum drying furnace adopts variable-pressure drying principle suggested by Dr. Moll from Germany, which is specialized for drying transformer bodies. Compared with conventional vacuum heating drying methods, the variable pressure type can save up to 30-45% drying duration.
    2. Amorphous Transformer Machine This amorphous cutting machine is specially designed for automatic cutting and stacking amorphous strips for cores.
      This line adopts PLC control, servo drive, touch screen operation and high precision mechanical transmitting mechanisms, thereby ensuring high automation, high productivity and high reliability.
    2. Corrugated Tank Machine

      We have a complete range of machines for making transformer corrugated tanks:  
      1- Transformer corrugated tank fin forming machine
      2- Transformer corrugated tank fin welding machine
      3- Corrugated fin reinforcement spot welding machine
      4- Corrugated fin wall bending machine
      5- Powder coating line

    2. EHV Circuit Breaker Analyzer The EHV circuit breaker KC-6A analyzer is standalone; it has a microprocessor-controlled, 6 dry contacts, analyzing extra high voltage circuit breaker's performance by testing contact time, stroke, speed and over-travel, etc.
    2. LV Foil Coil Winding Machine We have both LV foil coil winding machines and HV foil coil winding machines available for dry transformers and high quality oil immersed transformers. The LV foil coil winding machine is available in 800mm, 1100mm and 1400mm width, single-layer or double-layer.
      Our HV foil coil winding machine is specially designed for high voltage foil coils, high automation, and high precision.
    2. Transformer Coil Winding Machine

      We have a variety of coil winding machines for distribution transformers and power transformers available:
      LV coil winding machine
      HV coil winding machine with automatic wire guiding device
      Fully automatic coil winding machine with auto insulation winding
      Fully automatic multiple coil winding machine
      Vertical coil winding machine for power transformer

    2. Vacuum Impregnation Equipment Our vacuum impregnation equipment is mainly designed for insulation treatment of electrical products including wind turbines, power capacitor, high voltage motor, H-grade dry transformer, as well as cable insulation materials, and so on.
    2. Transformer Core Winding Machine

      We have various core winding machines:
      - Heavy-duty transformer core winding machine
      - Full automatic toroidal core winding machine
      - Semi-automatic toroidal core winding machine
      - Miniature magnetic core winding machine
    2. Transformer Core Cutting Machines We have various transformer core cutting machines available:
      Fully automatic CNC step-lap mitred core cut to length line (GEORG like)
      Compact swing shear step-lap mitred core cut to length line
      Distributed gap core cutting machine (UNICORE like)
      High speed electrical silicon steel rectangular / straight cutting machine
    2. Cable Fault Locating System Cable fault locating & detecting involves a complete system, instead of a single tester. We offer different configurations of cable fault locator systems for underground and overhead cables. These are also available in different voltage levels, ranging from 380V to 220kV, and even 500kV.
    2. Wire Mesh Welding Machine This mesh welding machine is of full automatic, PLC control.
      The space between longitudes is adjustable before welding.
      The space between each woof can be preset in the PLC.
    2. Micro-Ohmmeter The HL series for micro-ohmmeter measures circuit-breaker contact resistance, bushing contact joints or any low-resistance conductor path that requires testing. This microprocessor controlled micro-ohm meter can accurately measure low resistances ranging from 1 micro-ohm to 20 milliohms at any test current from 10A to 600A.
    2. Vacuum Annealing Furnace This annealing furnace is specially designed for releasing inner stress inside wound CRGO cores and decreasing their iron loss.
      It is inner-heating, vacuum, nitrogen-cooling, front load type with trolley.
    2. Protective Relay Tester The protective relay tester is an important testing tool that ensures power system is running securely and reliably. JB series protective relay testers are computer-based, true color LCD graphic display and WOS, Windows operation system. It is compact, portable and light weight, 16Kg to 18Kg.
    2. Concrete Pipe Cage Welding Machine DC power can assure the welding speed, prolong the life of welding electrodes and save at least 30% electric consumption
      PLC, inverter, touch screen are imported
      Densely-wind length on both ends of the cage and the hoop reinforcement interval can be pre-set on the touch screen.
    2. Paper Folding Machine This machine is mainly for folding interlaminar insulation paper used in transformer windings. After winded in the coil, such folded insulation paper will form the end-insulation, thus increases mechanical intensity, winding efficiency of coil and decreases the material cost.
    2. Pin Finned Tube Welding Machine This pin finned tube welding machine employs Siemens SINUMERIK802 control system for easy and simple operation. The pin finned tube welding device is generally used to weld the steel pin to the base pipe for boilers. High automatic, the welding equipment is capable of completing pin feeding (2 heads), welding, indexing, base tube feeding, etc.
    2. Steel Grating Welding Machine This steel grating welding machine is composed of gantry type welding machine, double-layer flat steel feeding device, cross bar auto falling device, steel grating hauling device, hydraulic & pneumatic system, cooling system, electric control system, etc.
    2. CTC Production Line Our CTC production line is able to produce the continuous transposed conductors used in huge transformer windings with voltage of less than 1000MVA and 1000KV. This device is capable of stranding many flat copper wires together. It, through accurate mechanical actions of transposing head ...
    2. Arrester Tester The arrester tester checks AC electrical parameters of zinc oxide arresters, perfect instrument for both worksite and laboratory testing. It adopts advanced microcomputer as main control, full intelligent operation and strong anti-jamming ability for high precision measuring results.
    2. Fan Guard Making Machine Our fan guard making machine is mainly used for producing radial type electric fan guards (covers), both front and back. The electric fan guard production line is composed of radial wire auto welding machine, mid ring welding machine, outer ring welding machine, ring forming machine, butt welding machine, hydraulic press, wire bending machine for handles, handle welding machine, edge trimming machine, and so on.
    2. Vacuum Bottle Tester Different to conventional power-frequency withstand voltage test method, the vacuum bottle tester adopts ionization charges sampling technology, quantitatively testing vacuity of vacuum bottles, evaluating if vacuum bottle in circuit breaker is in normal range and calculating vacuum switch life with fast leaking.
    2. H gilled boiler fin tube welding machine Controlled by PLC, the H Gilled Boiler Fin Tube Welding Machine offers semi-automatic production. The production process includes manual steel pipe feeding, manual fin tube unloading, manual fin loading, and automatic fin delivering. The fin spacing and length can be set up on the PLC. Importantly, the fin spacing for one tube can be varied.
    2. Impulse Voltage Generator Impulse voltage generators are used for conducting lightning impulse tests on electric cables, capacitors, bushings, power transformers and instrument transformers. They can carry out standing lightning full wave impulse tests, chopping wave impulse tests and standard operation wave impulse tests.
    2. Wedge Wire Filter Tube Welding Machine This Wedge Wire Filter Tube Welding Machine is specially-designed for welding filter tubes for any filtering purposes in chemicals, mining, environmental protection, as well as many other industries.
    2. Dust Collector Bag Cage Welding Machine As the name implies, the dust collector bag cage welding machine is particularly offered for manufacturing bag cage for dust collector. The welding machinery is quite popular home and abroad because of the stable performance.
    2. 3D Truss Girder Welding Machine The 3D truss girder welding machine utilizes three coiled steel ribbed bars and two coiled round steel bars as the raw material for production.
      The 3D truss girder is a kind of advanced invention for building construction.
    2. Wheel Rim Bending Machine We can provide all the related machines for producing wheel rims, such as rim bending machine, rim butt welding machine, rim trimming machine, rim rolling machine, and so on.
    2. Hovercraft for In-plant Transportation Compared with traditional mode of transportation, our hovercraft for in-plant transportation has high safety, high efficiency, high flexibility, and of course low cost. This range of product is widely used in transformer factory, diesel engine plant, electric car industry, automobile industry, etc. It is also an ideal tool for transport service.
    2. Battery Making Machine This machine is specially designed for casting board and grids used in batteries. It can melt lead, keep constant mould temperature, feed certain lead liquid, cast and trim edge, all in one machine.
    2. CNC Coil Winder

      We have a variety of different CNC coil winding machines available for different applications:
      - Fully automatic air coil winding machine
      - Fully automatic speaker voice coil winding machine
      - Fully automatic wireless charging coil winding machine
      - Fully automatic miniature toroidal coil winding machine

    2. SF6 Analyzing Meter The SF6 Analyzing Meter is a modern instrument, measuring moisture content in hydrogen, nitrogen, other inert gases and non-corrosive gases, especially SF6 gas, in high precision. It's used in SF6 switches distribution station, hydrogen station and hydrogen-cooling generators, also used in petrochemical and metallurgical industry, environmental protection industry, scientific research institutes and other fields.
    2. Hook and Eye Machine Our hook and eye machine is produced using advanced technology from Japan, with high speed and good working efficiency.
      It is equipped with auto feeding and straightening device, and can automatically stop when there is fault.
    2. Shot Blasting Machine Shot blasting room
      Cylinder inverting device
      Blast gun moving system
      Cylinder rotating device
    2. Vacuum Resin Casting Equipment Our vacuum resin casting equipment is applicable for epoxy resin casting bushings, HV switch insulators, arc-distinguish coils, current transformers, potential transformers, dry-type transformers, as well as other electric apparatus.
      This machine is able to carry out with-stuffing and without-stuffing casting.
    2. Rolling Shutter Slats Roll Forming Machine This roll forming machine can produce rolling shutter slats with polyurethane foam online injected. Its PLC control system such as PLC, touch screen, inverter and encoder are imported from Japan.
      - Steps of rollers: 32 stations
      - Length of main machine: 24 meter
    2. CNC Plasma Cutting Machine Adopting ball screw plus servo motor driving system, this table type plasma cutting machine has a very high cutting speed and accuracy. So the cutting machine is especially suitable for making elbows, joints for HVAC round and square duct system. In addition, we can manufacture any CNC plasma cutting machine to meet your special requirements.
    2. Power Quality Analyzer The power quality analyzer helps to locate, predict, prevent and troubleshoot problems in power distribution systems. It is featured with big size memory, suitable for long-time analyzing and collecting data of power grid; its software analyzes data collected and uploaded into PC.
    2. Thermal Spraying Equipment The plasma spraying equipment is composed of spraying gun, power rectifier, control system, cooling system, powder feeder, etc. It utilizes plasma arc as heat source, and uses powder as coating material.
    2. Oval Tank Head Flanging Machine Our flanging machine is equipped with a copying system which is ideally suitable for flanging oval tank heads or any other special shaped tank heads. These tank heads are commonly used in liquid tank trucks.
    2. Metal Spinning Machine Full automatic, CNC control, the running track, speed and directions of spinning wheel, as well as the spindle speed are controlled by program, easy to operate.
      Siemens control system and humanized interface make it convenient to modify the programs.
    2. Paper Stick Making Machine The paper stick manufactured with our automatic paper stick making equipment is generally used by cotton swab and lollipop. The cotton swab stick making machine is characterized by high automation, high production speed, simple operation, and easy maintenance.
    2. HVAC Duct Forming Machine We can provide a variety of HVAC duct forming machines, including spiral duct forming machine ...
    2. Flange Forming Machine The T-12 TDF flange forming machine is generally used for manufacturing steel plate with flange for square and rectangular ventilation duct system. The flange size can be customized. In addition, this product can also be used for producing fastener for square and rectangular duct system. Compact and movable, our product is quite convenient for use.
    2. Tube Spinning Machine Two axis CNC control, small error, high speed
      Hydraulic system is equipped with water cooling system
      High speed mandrel speed 2800rpm, inverter control, speed adjustable
      Automatic loading, unloading Main Technical Data of Tube Spinning Machine
    2. Square Duct Production Line III The production line III mainly consists of electric decoiler, leveling & grooving device, hydraulic notching & punching device, hydraulic shearer and hydraulic folder. The precision and reliability of this Square Duct Production Line III is guaranteed by using a computer with a closed-loop servo-system in the electrical control system. Various production lines can be configured according to your detailed requirements.
    2. Gorelocker This Gorelocker (also called as elbow making machine) is designed for producing round elbows in ventilation & air conditioning system.
      Elbow diameter: 125-1000mm
      Max. segment angle: 30 degree, 4 pieces for 90 degree elbow
    2. Turret Punch Press Tool Grinding Machine Our grinding machine is specially designed for grinding the punching tools that are used in a turret punch press. The maximum grinding diameter is up to 300mm. The available rotary table will offer a 0 and 15 degree incline, when it is utilized for cutting rooftop tools (one kind of punching tools).
    2. CNC Tube Bending Machine Three-axis numerical control, hydraulic clamping
      Gear and rack driving, each axis is equipped with high precision planetary reducer
      Tracking die is restored pneumatically
      CNC control, 12.1” touch screen operation, simple and easy
    2. Die Casting Machine Being made of hot-work iron or steel, nozzle, gooseneck and melting pot are especially.
       Heated by electric heater, nozzle and goose neck are safe and durable. This keeps temperature steady and avoids jamming of nozzle, resulting in no defective products.
      Auto central lubricating system, directly setting up times of toggle turning lubrication.
    2. Spiral Duct Forming Machine Special mould for various diameters, very easy to change and adjust, crane or too much manpower are not needed
      Large diameter range
      High speed synchro flying cutting system
      PLC touch screen control, convenient operation
    2. CNC Plasma Cutting Machine This CNC plasma cutting machine can be designed and manufactured according to customer's requirements. Different plasma power for different thickness, different cutting length and width, different control systems and quantity of plasma or flame cutting torches are available.
    2. Polyurea Spraying Machine The polyurea spraying machine is generally employed for spraying polyurethane elastomer, polyurethane foam, and some other materials. It is widely seen in the construction of embankment waterproof project, pipeline anticorrosion treatment, sub-cofferdam, tank and pipe coating, cement layer protection, sewage water treatment project, roof and cellar waterproof project, and so on.
    2. Hydraulic Press Four-column structure, simple and economical
      Hydraulic system adopts pin-fit valve integration system, with the advantages of reliable action, long life, small hydraulic impact, no leakage.
      Electric control system is separate. You can pre-set fixed stroke or fixed pressure.
    2. CNC Spring Coiling Machine Thanks to the high precision detection device, the CNC spring coiling machine will stop automatically in case unqualified spring is detected.
      Both the outer diameter and the angel of spring can be revised in real time according to the working condition displayed on HMI.
    2. K Span Roll Forming Machine This MIC-240 super K span machine developed by us adopts the same technology with ABM MIC-240 forming machine. It is comprised of mechanical expansion decoiler, straight panel forming unit, hydraulic / electric mould cutting device, curving panel forming unit, control system, run-out racks for straight, curve panels and all other accessories and tools.
    2. Venetian Blind Slat Machine Just as its name implies, our slat machine is ideally suitable for the manufacture of aluminum venetian blinds. This equipment integrates with a series of processes like forming, punching, cutting, as well as stringing.
      With a fully automatic system, it is controlled by PLC system.
    2. Pulley Spinning Machine Our pulley spinning equipment has two functions, namely center bearing hubs flow forming, and blank material folding and multi-grooves spinning. The horizontal pulley spinning machine, which can be constructed with four or five stations, supports automatic tool changing. This range of pulley spinning machine is well received because of the simple operation and high efficiency.
    2. Hydraulic Press Brake This hydraulic press brake is normal numeric control, without CNC control system. The adjustment of backgauge and ram stroke is manual.
      Steel-welded construction, vibration to eliminate stress, with high strength and good rigidity.
       Hydraulic top-drive, steadiness and reliability.
    2. Paper Taping Machine The configuration of the paper taping machine is on the basis of taping layers, quantity of wires required, and wire reel sizes. This device is able to perform single-wire taping or multi-wire taping. The taping layer ranges from 2 to 60 layers.
    2. Motor Making Machine The rotor coil winding machine is especially used for winding coils for motor rotors. This device comes with PLC control system, touch screen operation, as well as automatic wire traversing.
    2. Steel Deck Roll Forming Machine Steel deck roll forming machine consists of mechanical expansion decoiler, feeding & embossing device, main forming unit, PLC control system, hydraulic mould cutting device and manual unloading rack. Different profiles of this steel deck roll forming machine are possible, which can meet all your customers' requirements.
    2. Water Jet Cutting Machine This cutting machine is free of heat-affected zone (HAZ) or heat distortion.
      It provides easy control, high accuracy and excellent edge finishing without frayed edges or burrs.
      Small kerf size (usually less than 1.2mm), low waste.
      This water jet cutting machine can cut almost all kind of materials, even sandwich panels.
    2. Expressway Guard Rail Machine This expressway guard rail forming machine is mainly composed of mechanical decoiler, feeding & guiding device, leveling device, pre-punching station, roll forming unit, hydraulic mould cutting device, hydraulic station, PLC control system and unloading rack.
      The product of this roll forming machine is widely used as guard rail for expressway.
    2. CNG Cylinder Spinning Machine As a professional supplier, we are in the position to provide complete production line for manufacturing CNG cylinders, including automatic loading & unloading device, medium-frequency pre-heating device, hot spinning machine, conveyor, bottom pressing device, cylinder mouth threading device, cylinder inner wall shot blasting device, cylinder shoulder marking device, etc.
    2. H-beam Production Line This line consists of CNC controlled straight/profile flame cutting machine, H-beam auto assembling machine, gantry type H-beam welding machine, H-beam steel rectifying machine and shot-blasting machine.
    2. Automobile Radiator Making Machine We have a complete range of machinery for producing automobile radiators:
      - Aluminum microchannel flat tube cutting machine
      - Header pipe punching machine
      - Automatic core builder
      - Automatic tank clinching machine
      - Aluminum brazing furnace
    2. CNC 3D Wire Bending Machine High speed, each bending process cost 1.0-1.5 second
      Heavy bending capacity for wire up to 10mm diameter (customized)
      This CNC wire bending machine is equipped with servo motor and air compressor as driven power to instead hydraulic pressure, thus keeping the machine clear and easy to maintain.
    2. Street Pole/Post Production Line It is the production line that is ideal for producing lamp pole / post, signal pole /post, electric pipe tower and telecom power, etc.
      Simple decoiling, leveling and slitting line
      Beveled Cutting Line
    2. Spiral Filter Core Forming Machine Any length can be cut according to customer's requirement.
      By adjusting clutch, the spiral forming machine can be suitable for materials of different thick.
      Adopting PLC control system, this forming machine offers high efficiency, stable quality, less procedures and materials, thus reducing the production cost.
    2. Serpentine Tube Bending Machine We provide two different serpentine tube bending machines: one for bending microchannel flat aluminum tubes used in automobile evaporators, and another for bending round metal tubes for heat exchangers.
    2. Vacuum Kneader Our vacuum kneader has widely application. It is extensively seen in the industry such as silicone rubber, moulding rubber, hot melt adhesive, printing ink, painting, pigment, dyestuff, oil paint, and carbon material. In addition, the vacuum kneading device is an ideal tool for the other industries, including chemical industry, plastic, medicine, cosmetic, foodstuff, tape, urea-formaldehyde molding powder, starch, gum base, welding electrode, etc.
    2. Mechanical Press The JL21 stroke adjustable press comes with welded body for high intensity.
      The mechanical press is installed with dry type pneumatic friction clutch.
      Users can adjust the sliding block stroke through the air cylinder.
      In addition to the eight-face slide guide, this range of product is equipped with overload protection device.
    2. Steel Tube (Cylinder) Necking-in & Closing Machine Our steel tube (cylinder) necking-in & closing machine uses an automatic medium frequency heating method for hot spinning. It can be used for both necking in and closing steel tubes and cylinders. It can close flat ends, spherical ends and elliptical ends, with a freely adjusted necked in mouth diameter.
    2. Tube Cutting Machine The tube cutting machine is a NC cut-to-length machine for straightening coil copper tubes and cutting it into the length required, automatically. It adopts special cutting technology, resulting in chipless cutting and small deformation of the cutting section.
    2. Ring Bending Machine Full hydraulic drive, stepless speed changing
      Imported hydraulic components: such as hydraulic engine from Denmark; motor, oil pump and electromagnetic valves from Taiwan; encoder from Japan.
      Numerical display plus encoder for setting length and cutting automatically